Precautions for use of colloidal gold card reader and technical information of gold standard card reader:
CSF-JA colloidal gold card reader, gold standard card reader safety protection and accident handling:
a) Safety protection and precautions
Non-manufacturer authorized personnel shall not disassemble the instrument privately, and shall not replace the instrument components without permission. All components shall be replaced and repaired by the manufacturer or authorized personnel of the manufacturer. Use protective gloves or other safety measures when handling infectious materials.
b) Processing method when a fault occurs
When the printer is overheated, stop using the machine and wait until the printer has cooled naturally before using it again.
c) Emergency handling
If the instrument catches fire during use, the power switch should be disconnected immediately and the power should be turned off. If the entire circuit catches fire, the main switch must be disconnected to cut off the external power supply.
If it is too far from the power supply and there is no time to break it, measures should be taken decisively to cut off the power source away from the burning place in the correct way. Be careful not to cut with a hand or non-insulated metal tool. Stand on a wooden bench and cut the wire with a wire cutter with an insulated handle, a diagonal pliers, etc. The fire can be extinguished by conventional methods after the power is turned off.
If you cannot quickly power off, you can use carbon dioxide, carbon tetrachloride, 1211 fire extinguisher or dry powder fire extinguisher. When using, you must maintain a safe distance of not less than 40CM.
After the fire is extinguished, contact the supplier or the manufacturer for disposal. Do not allow the instrument to be reused after it has not been treated.
Maintenance
a) daily maintenance
Daily clearing:
The outer casing of the instrument can be cleaned with a neutral detergent and the organic solvent is disabled.
It must be stopped before maintenance, please refer to the shutdown operation procedure.
b) Maintenance during operation
When the red paper on the printer's paper indicates that the paper is running out, replace the paper as soon as possible. After the replacement, the paper cover of the printer should be pressed down and installed.
c) maintenance cycle
After 12 months of use, the instrument should be routinely serviced to check for loose parts.
d) normal maintenance procedures
Touch screen maintenance:
Due to temperature, power supply voltage variation or other factors, the touch screen may not display properly or the display may be too pale or too dark. In this case, contact the relevant personnel for repair.
Moving parts maintenance:
After the instrument has been in operation for 12 months, you can contact a professional engineer to perform routine testing on the instrument.
e) Maintenance during long-term decommissioning
If the instrument is not used for a long time, Shenfen Instruments prompts you to clean the instrument after cleaning it regularly, and store it in a dry and cool place.
Transportation and storage
a) Packaging and transportation precautions
The packaged analyzer should be transported according to the specified conditions. When transporting, it should be handled lightly to ensure the integrity of the outer box, pay attention to waterproof and moisture.
b) Storage conditions, storage period and precautions
Storage temperature of the instrument: -20 ° C ~ 55 ° C.
Storage humidity of the instrument: Relative humidity is less than 93% and there is no condensation.
Other requirements: non-corrosive gases and well ventilated areas
CSY-JA colloidal gold card reader, gold standard card reader technical parameters:
Test items: suitable for colloidal gold immunostaining layer and colloidal gold immunochromatographic strips suitable for different widths. The test strip width can be 2-6mm (PCT, HIV, CRP, NT-proBNP, MYO and other colloidal gold immunochromatography projects)
Operation instruction: use the touch screen interface to display the menu for man-machine dialogue detection results: semi-quantitative, quantitative detection results can exclude invalid detection results, can save data results, original scan curve and print concentration results and concentration unit detection item parameters users can Instrument function options read the instrument configuration parameter test result report: can accurately report the concentration of the tested substance, can be displayed on the touch screen, can be connected through the instrument built-in printer output: USB interface, serial port, network port accessory function: built-in WIFI module measurement principle: measurement principle: photocell measurement reflection attenuation signal strength detection speed: 240 times / hour repeatability: DR value is not more than 1% (standard card)
Difference between instruments: 3% or less (standard card)
Data transmission: USB and network port screen display: 4.3-inch high-definition touch screen 56mm (L) × 98mm (W) (5, 7, 10 inch custom)
LED light source wavelength: 450nm ~ 475nm
Volume: 290mm × 240mm × 110mm
CSY-JA colloidal gold card reader, gold standard reading fast instrument Features:
1. Support qualitative, quantitative and semi-quantitative testing of all gold standard items;
2, ID card independent encryption and authorization, built-in concentration curve and batch number, protection reagent manufacturer information;
3, CT line position can be customized to identify, support line width and line spacing settings, support real-time display detection curve;
4, built-in large-capacity storage database, you can query the tested items at any time;
5, support the hospital's general database interface, support LIS system, built-in USB interface, support for expandable peripherals;
6, can be built-in barcode recognition module, can be installed with two-dimensional code recognition module (custom)
7. Automatically and accurately identify the position of the CT line, and the error correction range can reach ±3mm;
8, 12V low-voltage power supply, support the use of car power, custom models can be built-in rechargeable battery;
9. The whole machine supports customization according to customer requirements.
The company's products have passed ISO9001 quality system certification.
The company passed ISO14001 environmental system certification
The company's products have obtained a number of national patent certificates.
Company products obtained computer software copyright
Core technology: independent brand Shenfen instrument, China manufacturing, patent products, technical support
Transportation guarantee : high quality EPE pearl cotton cushioning material, cowhide corrugated paper, and fumigation-free wooden box meet the requirements of export and domestic transportation.
After-sales guarantee : The instrument is guaranteed for one year free of charge , and lifetime maintenance is trustworthy!
The company produces patented products: CSY-R meat moisture analyzer, CSY-G5 solid content detector, CSY-H5 infrared rapid moisture analyzer, CSY-L5 halogen rapid moisture analyzer, CSY-K2 trace moisture analyzer, CSY- K5 Karl Fischer moisture analyzer, CSY-Z online moisture analyzer, CSY-N16 pesticide residue detector, CSY-SDC frying oil quality detector, edible oil quality detector, CSY-E96SY veterinary drug residue detector, food safety Detector and supporting test reagents, CSY-JA colloidal gold card reader, test box, test card, speed test box.
Dehydrated Ginger,Dried Ginger To Fresh,Ground Ginger For Fresh Ginger,Freeze Dried Ginger
jiangmen city hongsing food co., ltd. , https://www.jmhongsing.com