From a philosophical point of view, there is an important relationship between the whole and the parts, some of which form an integral whole, and some of the advantages and disadvantages are related to the overall good or bad. For agricultural machinery, whether the agricultural machinery parts are well-preserved or not plays a key role in the operation of the entire agricultural machinery. Therefore, agricultural machinery parts must be kept well.
Precision parts
Such as injector couplings, discharge valves and live couplings, etc., with a small gap, a slight corrosion will reduce the performance, it is scrapped. therefore. For new parts that are not used temporarily, do not open the original packaging and keep it in a dry and ventilated place. Used parts, use clean diesel to wash off coke and other dirt, assembled in pairs, placed in a container filled with clean oil level of oil in order to prevent the parts exposed from the oil surface and the air is appropriate. For new shafts or old shafts that have not been used for shaft parts, the surface finish should be coated with grease (butter) and then kept in a dry and ventilated place. Longer shafts should be placed flat or vertical, and avoid tilting so as not to cause deformation.
spring
Such as torsion springs, plunger springs and fuel injector pressure regulating springs, etc., should be coated with grease and stored in plastic bags. Do not expose naked or contact with harmful substances to prevent rust and reduce performance.
rubber products
Oil seals, waterproof collars, rubber linings, and tires, even if it is oil-resistant rubber products, should be kept away from oil. At the same time should avoid exposure, baking, freezing or soaking.
plastic products
Plastic parts must not be exposed to heat, cold or fire. Therefore, in the custody should pay attention to away from the fire, do not expose to the sun or frozen, and do not mix with metal parts or run into acid-base substances, so as to prevent aging damage.
Sliding bearing
Such as bushings, copper bushings, powder metallurgy bushings, etc., should maintain the oil wax layer intact during storage, and avoid mixing with other miscellaneous items, tools, etc. to avoid collision deformation and corrosion.
Rolling bearing
Do not use unopened, should be stored in a dry and ventilated place. Used bearings should be cleaned of grease, greased, packed in plastic bags or sealed with kraft paper.
FPC RFID Tags are characterized by high temperature resistance and small size. For some special occasions, such as high temperature assembly line, assembly line, production process management, inventory management and other application environments have strong adaptability. It is suitable for asset management, high temperature injection molding, automotive industry, game interaction and so on.
Nfc Fpc Tag,Fpc Rfid Tags,Fpc Rfid Nfc Sticker,Rfid Chip Nfc Fpc Tag
Guangdong Xinye RFID Label Application Co., Ltd , https://www.xinyerfid.com