First of all, to purchase more models to promote in this area, you may wish to visit the nearby farmers to see the actual use of results, and ask whether the accessories in the local good buy, if there is no local supplier of accessories, future accessories It's a hassle if you can't buy it.
Second, the types of feed mills should use different models depending on the raw materials. For crushing grain feeds, hammer mills with top feed can be selected; for crushing bran wheat feeds, claw mills can be selected; if good versatility is required, such as crushing grains, In consideration of cakes and stalks, tangential feeding hammer mills can be selected. If pre-mixed feed is used for pre-processing, the product must be finely crushed and can be adjusted according to needs. Special-purpose sieve-free smashing should be selected. machine.
In addition, it is necessary to select the model with the appropriate production capacity according to the scale of their own breeding. The crusher's rated capacity is contained in the manual and nameplate of the general crusher. But there are two things to note: First, the rated production capacity contained is generally based on the output of the comminuted corn, the moisture content of the storage of safe moisture (about 13%) and a sieve with a 1.2 mm diameter hole, because corn is Commonly used grain feeds, sieves with a diameter of 1.2 mm in diameter, are the smallest sieves commonly used. In this case, the production capacity is small, which takes into account the more common and difficult conditions in production. The second is to select the crusher, its production capacity should be slightly larger than the actual production capacity, to avoid the hammer mill wear, air leakage caused by the wind mill, etc., will not affect the continuous production and supply of feed.
Hospital Trolleys,Hospital Medical Trolley,Ambulance Stretcher Trolley,Hospital Emergency Trolley
jiangyin chenyi medical technology co.,ltd , https://www.chenyimed.com