Rabbits are happy to be clean and quiet, and should avoid filth, moisture, and noisiness. Therefore, rabbit farms should be kept away from traffic arteries and residential areas, and surrounding walls should be built around rabbit farms. Rabbit house construction should take into account the constant temperature and humidity. There is plenty of sunshine, air circulation, etc., so as to create a good breeding environment for rabbits. In addition to this condition, the following precautionary measures should be taken to prevent the rabbit from becoming ill or suffering from the disease.
The scientific management of the rabbit's health is closely related to feeding and management. Many people mistakenly believe that disease prevention is injection and medicine. In fact, scientific feeding and management are the main measures for disease prevention. For example, the reasonable mix of feed, the effective control of the environment (including temperature, humidity, ventilation, density and light, etc.), feed timing, qualitative, quantitative and so on. Only when the feeding and management work is done well, the rabbit's physique is robust and its disease resistance can be enhanced.
Strict implementation of the epidemic prevention system for the initial raising of rabbits should be introduced from non-epidemic areas. Newly purchased rabbits should be isolated for observation for a period of time (20-30 days). The rabbit farm must decline to visit, non-raising staff can not be easily accommodated.
Do a good job of sanitization Disinfection of cages in a timely manner and change the litter of the production box, and regularly sterilize feeding equipment, cages, production boxes, etc. This is an effective measure to reduce environmental pathogens. Every rabbit farm should develop a feasible disinfection system. Such as daily cleaning of feed, drinking fountains, disinfection once a week; daily cleaning of feces and bedding; rabbit house disinfection in the summer 1 time a week, as appropriate in winter; rabbits before each delivery and transfer before the rabbit Both cages and rabbit houses should be sterilized.
Prophylactic vaccination according to immunization procedures For some severe infectious diseases, such as rabbits, Clostridium perfringens, Borrelia, etc., the most effective method is to inoculate the diseased (bacteria) seedlings in advance. For other diseases of rabbits, such as coccidiosis, rickets, pasteurellosis, enteritis, mastitis, etc., according to the law of occurrence, on-time medication prevention is one of the important preventive measures and can receive significant results. .
Adhere to self-cultivation and self-cultivation, after breeding a healthy rabbit group rabbit farm to reach a certain scale, do not easily introduce from the outside. Should adhere to self-cultivation and self-support, through the following ways to obtain a healthy rabbit group: selected outstanding individuals to do rabbit breeding, repeated quarantine, eliminating diseased rabbits and carriers (poisonous) rabbits, and gradually achieve relatively disease-free; repeated repeated deworming, In order to achieve basically no insects; strengthen general preventive measures and strictly control the intrusion of any source of infection. After 3-5 years of selective breeding, breed healthy rabbits.
Isolation clothes, also known as clean work clothes, clean work clothes, purification clothes, dust-free clothes, sterile clothes, anti-static work clothes, dust-free work clothes, work clothes, protective clothes, etc.
In addition to the fact that clothing itself cannot be a source of dust emission, it also has the effect of preventing dust from being emitted by the human body. At the same time, as a sterile clothing, it should have basic properties such as safety protection, comfort, ease of operation, aesthetics, etc. in materials and design. Otherwise, due to the different styles, fabrics and sterile underwear of the work clothes, it directly affects the number of dust and colonies in the clean room.
Widely used in electronic, pharmaceutical, food, biological engineering, optics, aerospace, aviation, color tube, semiconductor, precision machinery, plastics, paint spray, hospitals, environmental protection and other industry clean workshops, there are a variety of colors and specifications suitable for different anti-static Or clean environment.
* Performance editing
100% high-density polyethylene material, one-piece hooded design, breathable and moisture-permeable, can block the penetration of fine dust and liquids, and at the same time allow water vapor to permeate; light and tough, prevent the accumulation of static electricity, it does not produce dust , Free of silicon.
It is made of special polyester filament, warp or warp and weft inlaid with Japanese bell spinning 9R series conductive fiber, and manufactured by a special process. Has excellent, long-lasting conductivity. It is a necessary measure for anti-static of personnel clothing.
The charge of work clothes: <0.6 micro library / piece. Charge area density: <7 microbanks / square meter.
(Annotation of "micro-coulomb": "coulomb" is a unit of charge measurement, 1 coulomb = 1000 milli-coulomb = 1,000,000 micro-coulomb. 6.25 × 108 electrons carry 1 coulomb, and the power of one electron belt is 1.6 × 10 19 coulombs).
* Fabric editing
The fabrics used are: fabrics containing conductive silk, gabardine, yarn cards, TYVEK (acid and alkali resistance), etc.
Conventional optional fabrics: 5mm strip type, 5mm mesh, 2.5mm mesh fabric conductive silk, its anti-dust and anti-static effect is getting stronger and stronger in order; this is also selected according to the clean room level, generally CLASS10000 The clean room below (ten thousand area) should use 5mm strip conductive silk, CLASS1000 (thousand level area) and 5mm grid should be used; CLASS100 (100 level area) clean room should use 2.5mm grid fabric conductive silk.
Isolation clothing fabric-like characteristics
1. Japanese original parallel wire processing technology, with excellent anti-static performance, is permanent and can effectively discharge human body electrostatic charge;
2. The clothing itself is not dusty, non-sticky, has good barrier properties, high density, high strength, can effectively sterilize, and inhibit bacteria
3. Good washing resistance, bending resistance, abrasion resistance, etc., washing resistance ≥100 times, high temperature steam temperature: 120 ℃;
4. All-over-seaming process of special equipment imported from Japan, one-time forming, good dust resistance, can be used in 10-10 thousand grade clean room;
5. Especially recommend the production and sales of breathable anti-static clean clothes.
* Advantage edit
1. The fabric itself does not produce dust: because it is worn in a clean room, the fabric must not be a source of dust in the clean room, which determines that ultra-clean fabrics can only be produced with chemically synthesized long fibers. Natural short fibers such as cotton, hemp, and silk cannot be applied to ultra-clean fabrics, although these raw materials can make the fabrics more wearable. At the same time, it is required that the selected chemical fiber filaments also strictly control the amount of dust generated. Generally speaking, fully matt polyester filament is not suitable for weaving anti-static ultra-clean fabrics. Because the matting agent added in the production of polyester-titanium dioxide will become a source of pollution.
2. The fabric should have good dust filter: the dust in the clean room mainly comes from the air flowing in the room and the human body moving in the room. When the equipment conditions are determined, improving the cleanliness means that the fine dust generated by the human body should be controlled in the clothes to the maximum, and let it pass through the fabric and enter the air. This is the so-called fabric filter rate is higher. Increasing the dust filtration rate is at the expense of the breathability of the fabric, so knitted fabrics and woven fabrics that are more loosely woven are not suitable for clean rooms.
* Edit specifications
The fabrics used are: fabrics containing conductive silk, gabardine, yarn cards, TYVEK (acid and alkali resistance), etc.
Conventional optional fabrics: 5mm strip type, 5mm mesh, 2.5mm mesh fabric conductive silk, its anti-dust and anti-static effect is getting stronger and stronger in order; this is also selected according to the clean room level, generally CLASS10000 The clean room below (ten thousand area) should use 5mm strip conductive silk, CLASS1000 (thousand level area) and 5mm grid should be used; CLASS100 (100 level area) clean room should use 2.5mm grid fabric conductive silk.
Disposable Isolation Clothing,Disposable Isolation Gown,Disposable Medical Isolation Gown,Disposable Hospital Isolation Gown
Guangzhou Aikangli Medical Technology Co., Ltd. , https://www.aikanli.com