Precautions for using the UV aging test chamber and maintenance aging test chamber precautions and maintenance 1. During the operation of the equipment, be sure to maintain sufficient water.
2. The sensing device in the working room should not be subjected to strong impact.
3. The time for opening the door should be minimized during the test phase.
4. After stopping the use for a long time, if you need to use it again, you must carefully check the water source, power supply and various components, and then start the equipment after confirming that it is correct.
5. Non-professional operators are not allowed to operate at will.
6. If the equipment does not solve the problem, please contact us.
7. Because ultraviolet radiation has a strong hazard to people (especially the eyes), operators should minimize exposure to ultraviolet light (contact time should be <1min). Operators are advised to wear protective eyepieces and jackets.
Maintenance In order to keep the equipment working better and maintain good condition for a long time, please maintain it according to the following items:
1. When the equipment is not working, it should be kept dry, drain the water after running, and dry the studio and the cabinet.
2. After use, cover the plastic cover to avoid dust intrusion. If there is dust, it should be removed.
2. The sensing device in the working room should not be subjected to strong impact.
3. The time for opening the door should be minimized during the test phase.
4. After stopping the use for a long time, if you need to use it again, you must carefully check the water source, power supply and various components, and then start the equipment after confirming that it is correct.
5. Non-professional operators are not allowed to operate at will.
6. If the equipment does not solve the problem, please contact us.
7. Because ultraviolet radiation has a strong hazard to people (especially the eyes), operators should minimize exposure to ultraviolet light (contact time should be <1min). Operators are advised to wear protective eyepieces and jackets.
Maintenance In order to keep the equipment working better and maintain good condition for a long time, please maintain it according to the following items:
1. When the equipment is not working, it should be kept dry, drain the water after running, and dry the studio and the cabinet.
2. After use, cover the plastic cover to avoid dust intrusion. If there is dust, it should be removed.
Kn95 Cup 3D Mask,Kn95 Protective Mask,Kn95 Face Mask Online,Non-Medical Kn95 Face Mask
Jiangmen anjian biotechnology co. LTD , https://www.anjianmask.com