Processing method after the topping machine

After the TDP-1.5 small tablet press is handled by the car:

(1) When the car is in the process of electric pressing, the power should be turned off immediately to avoid burning the motor.
  (2) When the top car is light, you can use the hand to turn the handwheel to make the upper punch pass the "dead point" (but not reversed, so that the feeder does not repeat the feeding, resulting in a more serious top car).
  (3) When the vehicle is in serious position, loosen the connecting rod lock nut, turn the upper punch rod to raise it to reduce the pressure, and then turn the hand wheel to push the medicine out. Then re-adjust the hardness of the tablets.
8. Always check the quality of the tablets (sheet weight, hardness, surface finish, etc.) during the tableting process, and adjust them in time.
9. The batching granulation process before tableting has a great influence on the tableting. For example, the formulation of granules such as medicinal materials and slips, fillers, binders, etc. (the condition of the powder, the tightness of the granules, the proportion of the granules, the water content, etc.) directly affect the amount of the tablets . And often due to improper granulation of ingredients, it is impossible to form a piece or even damage the machine. Therefore, the machine cannot be used for tableting semi-solid or moist or non-granular fine powder. In the use, if the pressure has been adjusted to be quite large, it is still not pressed into pieces or pressed into pieces but appears too loose, layering, debris, pitting, falling powder and so on. It is necessary to find out the reasons and solve them from the aspects of ingredients. Do not blindly adjust to increase the pressure, and even damage the machine. In addition, although the hardness of the tablets extruded by some medicines is not large, it has a certain degree of toughness, and it is not bad for it to fall into the ground (usually it can be broken from the height of 1-1.2 meters on the ground), so it should be To meet the requirements of transportation and storage, do not focus on hardness alone, so as to avoid excessive pressure on the tablet and damage the machine.

If you want to know more about small tablet presses , please log in to our company :< > Or direct pharmaceutical technology department : <> consulting, our factory will provide you with more professional services!

Oranges are an important Nutritional source for human health and have immense economic value. Citrus Orange orange-yellow colour, gratifying Fruit savoryharmonious sourness and sweetnesssoft tasteflavor is rich and generous.Citrus is believed to be native to southeast Asia, and cultivation of fruit crops occurred in China at least 4,000 years ago.Citrus is a large genus that includes several major cultivated species, including Citrus sinensis (blood orange),  Citrus reticulata  (tangerine and mandarin), Citrus limon (lemon), Citrus grandis  (pummelo)  and Citrus paradisi (grapefruit).citrus fruits and juice are the prime human source of vitamin C, an important component of human nutrition.citrus-unique characteristics have hindered the study of citrus genetics and breeding improvement. Complete genome sequences would provide valuable genetic resources for improving citrus crops.


Citrus Orange

Nutritiunal Fresh Aromatic Sweet

China Chongqing Pangfanyi Technology Co.,Ltd. , https://www.pangfany.com