Handling
Handling precautions
1. When carrying, lift the foot, do not grasp the door handle or apply force on the table top and the condenser, and can not drag on the ground.
2. The maximum inclination angle of the box should not exceed 45 degrees, and it should not be inverted or placed horizontally. Otherwise, the compressor will be damaged or the refrigeration oil in the compressor will flow into the refrigeration pipeline, which will affect the refrigeration and cause the compressor to be unspring.
3. During the transportation process, it is necessary to prevent bumps and severe vibrations, and to prevent rain and water from immersing.
Place
Precautions for placing the quick freeze cabinet
1. It should be placed away from the heat source and away from direct sunlight. It needs to exchange heat with the outside world during work. It can dissipate heat to the outside through the condenser. The higher the ambient temperature, the slower the heat dissipation will make the refrigerator and quick freeze cabinet. The longer the working time, the more power is consumed and the cooling effect is poor.
2, should be placed in a place with low humidity, because the refrigerator, quick freezing cabinet shell, condenser and compressor are all metal materials, if the humidity of the air is too large, these parts will rust, shorten the life of the refrigerator. At the same time, the humid and overheated environment will cause condensation on the surface of the quick freezing cabinet, which will affect the performance of the electrical appliance.
3, should be placed in a well-ventilated place, if the freezer is surrounded by debris, or too close to the wall, is not conducive to heat dissipation will affect the cooling effect. The top surface of the quick freezing cabinet should have a space of at least 30CM, and at least 10CM space should be left on the back and sides to facilitate heat dissipation.
4. It should be placed on a flat and solid floor and keep the compressor level. This is not only for safety reasons, but also allows the compressor to work smoothly, reducing vibration and noise.
5. It should not be placed in an environment with flammable, explosive and corrosive materials. Also do not place such items inside.
China Feed Application supplier, offer high-quality Weed And Feed Application , Rss Feed Application, for you to choose.
JFHDFHD , http://www.nbcatalase.com