The small Chinese medicine pelleting machine is mainly used for the pellet production of Chinese herbal medicine. It can efficiently produce pellets, pellets, water-tight pellets, coating, drying and pelletized products produced by food processing. The machine uses a high-precision mechanical transmission. It can be processed continuously (or manually). Chinese medicine, health care, food industry production of round, sheet, strip products. The finished product is subjected to edge coating / sugar drying by a thermoelectric drying process .
Main technical parameters of small Chinese medicine pelleting machine:
1. Function range: It can produce honey pill, concentrated pill, water pill, water pill, coating, drying and pelletized food.
2, Pill Size: Φ3mm Φ4mm, Φ5mm, Φ6mm, Φ7mm, Φ8mm Φ9mm Φ10mm Φ11mm Φ 12mm Φ13mm
3 , productivity: honey pill
4 , motor output power: 0.18KW , electric heating 1KW
( 1 ) Voltage 220V , 50HZ ;
( 2 ) Voltage 110V , 60HZ ;
Motor speed 1400 rev / min, working speed 50 rev / min
5. Scope of application: Applicable to small pharmaceutical factories, large and medium-sized pharmaceutical factory trial rooms, Chinese medicine research institutes, Chinese medicine research institutes, hospitals, private clinics, Chinese medicine stores (rooms), tonic sales counters on-site processing and food factory pellets Food development and other units.
6 , size size: 546 × 321 ×
7 , machine weight:
8. Structure: This machine is composed of extruded roller clutch, pelletizing roller, water pill coating, full gear shifting, motor, electric heating and other components.
9 , technical characteristics:
(1) of a machine, washable convenient and simple; (2) small; (3) Light weight; (4) stability; (5) simple operation; (6) for easy cleaning; (7) power security; (8 ) low noise; ( 9 ) beautiful appearance; ( 10 ) all parts in contact with the drug and the outer casing are made of stainless steel, in line with GMP standards.
Small Chinese medicine pelleting machine details :
1. Before using the machine, remove the upper cover and the gear cover. A few drops of non-hydrated edible oil must be added to each oil eye, and then scrub the four rollers and the parts in contact with the pill with medical alcohol. Disinfection treatment.
2 , the upper cover, the gearbox cover is reinstalled and reset, the power is turned on, the switch is turned on, and the empty machine is rotated for 1-2 minutes.
3 , will be evenly distributed pellets. Put an appropriate amount into the extrusion slot, press the cake, then put the cake into the striping tank, and then make the pellets into the pellets and smash them into the pellets.
4 , water pill : put the medicine surface ( 0.1kg ) into the coating device, gradually put into the rice soup, form a granular shape, spray the edible water at intervals, and gradually roll into a pill.
5 , coating: After the pill is made, it can be placed in a water pill coater, wrapped in white, red and other outerwear.
6. Drying method: After the pill is made, the pill can be dried by entering the pill coating device for electric heating. It can be dried by hot air with a hair dryer or dried directly in the sun.
7. Polishing method: Put the pill in the water pill coating machine and roll continuously. The longer the rolling time, the smoother the surface.
Precautions when using small Chinese medicine pelleting machine:
1. This machine is suitable for ambient temperature
2. When operating, there should be no other unrelated items on the work surface. The pelletizing machine is placed on a stable table. When the power supply voltage is confirmed, the power supply should be close to the table. The power socket must have a reliable grounding wire. It is strictly forbidden to pull the power cord hard to prevent the person from tipping over and breaking the pill. Machine and other accidents occurred.
3. After the machine is used, remove the hexagon socket head screws as shown in the figure, open the upper and lower parts with the roller as the boundary, remove the four rollers, and wipe them with medical alcohol. Or, according to the need to change the rollers of different specifications according to the pill, you can install the reset as shown.
4. When scrubbing with medical alcohol, when changing the pelletizing roller and the outgoing clutch roller, the total power must be cut off and the power plug must be pulled out to avoid personal accidents.
5. When the pelletizing machine is in use, it is strictly forbidden to touch the pelletizing roller and the outgoing clutch roller with hand and brush or other tools to avoid stabbing the finger. It is strictly prohibited to protect the shell without the upper cover and the gear cover. , power processing and pelleting to avoid unnecessary personal accidents.
6. If the power cord is damaged (such as exposed bare wires), you must use a dedicated power cord. Go to the local office maintenance department to purchase replacement. In case of failure of the switch or socket, it must be stopped. It is strictly forbidden to change the line to continue to use. It is necessary to replace the opening or socket of the same specification in time to avoid mechanical and personal accidents.
7. Proportion production method: The method of making honey pill, water pill and coated medicine surface mixing is detailed in the reference formula of the pill.
8. The crushing equipment for this machine can be selected from our LH-08B continuous flow Chinese medicine crusher.
9. When the water pill coating device is not in use, it can be directly removed and washed in a clockwise direction, and then pulled out. Place in a reliable, clean place for use. Apply a small amount of clean cooking oil to the exposed part of the water pill applicator shaft to prevent rust. It is strictly forbidden to wash the whole machine or electric heater directly with water. When the unit is not in use, it must be placed in a dry, clean and ventilated place. During the use of electric heaters, it is strictly forbidden to contact with water to prevent electrical conduction and cause personal accidents such as electric shock.
Causes and troubleshooting of common faults in small Chinese medicine pelleting machines
Common faults of this machine | Production   Health   original   because | row    except    square    law |
The power must be turned off to perform the following operations | ||
1. After the unit is powered on, the motor does not run. | 1. Poor contact of the power cord or loose power plug; 2. Poor contact of the switch. | 1. Repair the power supply or exchange the plug of the same specification; 2. Repair or replace the beginning of the same specification. |
2. When the mechanism is pill, the shaft knife rotates or the medicine surface sticks. | The output stop lever is loose and there is a distance from the bottom of the shaft cutter. The pill cannot be scraped off the shaft slot. | Adjust to the distance between the discharge plate and the bottom of the shaft sipe, (about 0.1mm ) and tighten the set screws. |
3. When the motor is working, the motor stops suddenly. | 1. Capacitance is broken. 2 , the gear is stuck. | Check the gear slots for debris and clean them. |
4. When the machine is working, the shaft cutter has a slight jump. | Loose block screw loose | Open the top cover and tighten the 6 hexagon socket screws evenly. |
5. The machine generates abnormal noise during operation. | 1. The shaft knife and the friction part of the machine body are dry and oil-free; 2. There is no oil between the gears. | 1. Inject a few drops of clean cooking oil into the oil eye; 2. Apply a small amount of butter to each gear groove. |
6 , the heater fails to heat up. | 1. The plug is loose or the source line is off; 2. The heater heater wire is blown. | Replace the plug of the same specification or repair the power socket; |
Pharmaceutical Glass Vials, Pharma Glass Vials, Pharma Vials , butyl rubber stopper, seal, cap, empty IV bags, Empty IV Container, glass vials, ampoules
Pharmaceutical Glass Vials,Pharma Glass Vials,Pharma Vials,Empty IV Container
China Lemon Trading Co.,Ltd , https://www.lemonvial.com